Ricoh D146 Service Manual page 1276

5114 [Optional Counter I/F]
001 MF Key Card Extension
[Disable Copying]
5118
This program disables copying.
001 -
[Mode Clear Opt. Counter Removal]
5120
This program updates the information on the optional counter. When you install
or remove an optional counter, check the settings.
001 -
[Counter Up Timing]
5121
This program specifies when the counter goes up. The settings refer to "paper
feed" and "paper exit" respectively.
001 0:Feed 1:Exit
[Set F-size Document]
5126
Larger the value, easier the detecting.
System Maintenance Section
[0 or 1 / 0 / 1/step]
*CTL 0: Not installed
1: Installed (scanning accounting)
[0 or 1 / 0 / 1/step]
*CTL 0: Not disabled
1: Disabled
[0 to 2 / 0 / 1/step]
0: Yes (removed)
*CTL
1: Standby (installed but not used)
2: No (not removed)
[0 or 1 / 0 / 1/step]
*CTL 0: Feed
1: Exit
2-557 D146/D147/D148/D149/D150
Main SP Tables-5