Ricoh D146 Service Manual page 1461

Main SP Tables-8
Abbreviation
TonEnd
TonSave
TXJob
YMC
YMCK
§
All of the Group 8 SPs are able to reset by "SP5 801 1 Memory All Clear".
[T:Total Jobs]
8001
8002 [C:Total Jobs]
8003 [F:Total Jobs]
8004 [P:Total Jobs]
8005 [S:Total Jobs]
8006 [L:Total Jobs]
§
These SPs reveal the number of times an application is used, not the number of pages
processed.
§
When an application is opened for image input or output, this counts as one job.
§
Interrupted jobs (paper jams, etc.) are counted, even though they do not finish.
§
Only jobs executed by the customer are counted. Jobs executed by the customer engineer
using the SP modes are not counted.
§
When using secure printing (when a password is required to start the print job), the job is
counted at the time when either "Delete Data" or "Specify Output" is specified.
§
A job is counted as a fax job when the job is stored for sending.
§
When a fax is received to fax memory, the F: counter increments but the L: counter does not
(the document server is not used).
§
A fax broadcast counts as one job for the F: counter (the fax destinations in the broadcast are
not counted separately).
§
A fax broadcast is counted only after all the faxes have been sent to their destinations. If one
transmission generates an error, then the broadcast will not be counted until the transmission
D146/D147/D148/D149/D150
Toner End
Toner Save
Send, Transmission
Yellow, Magenta, Cyan
Yellow, Magenta, Cyan, Black
*CTL
*CTL
*CTL
*CTL
*CTL
*CTL
2-742
What it means
These SPs count the number of times
each application is used to do a job.
[0 to 99999999 / - / 1]
Note: The L: counter is the total number
of times the other applications are used
to send a job to the document server,
plus the number of times a file already
on the document server is used.
System Maintenance Section