Ricoh D146 Service Manual page 844

[Paper Thikness Detect]
1313
-
001 ON/OFF
[Relay Motor Speed Adjust]
1801
Setting for resolution of paper thickness sensor. (* No need to change)
Feed CCW:Plain:Low
Prevent shock jitter by adjusting sub scan scale, scale error rate declination,
001
image position accuracy improve. Reflects adjusted value as they are. All:
73mm/s, 1200dpi mode
Feed CCW:Plain:Std
Prevent shock jitter by adjusting sub scan scale, scale error rate declination,
002
image position accuracy improve. Reflect adjusted value as they are
Metis-C1a: 146mm/s, Metis-C1b: 146mm/s, Metis-C1c: 186mm/s, Metis-C1d:
256mm/s, Metis-C1e: 256mm/s
Feed CCW:Mid-thick:Std
Prevent shock jitter by adjusting sub scan scale, scale error rate declination,
003
image position accuracy improve. Reflect adjusted value as they are
Metis-C1a: 146mm/s, Metis-C1b: 146mm/s, Metis-C1c: 186mm/s, Metis-C1d:
256mm/s, Metis-C1e: 256mm/s
Feed CCW:Thick 1:Low
Prevent shock jitter by adjusting sub scan scale, scale error rate declination,
004
image position accuracy improve. Reflect adjusted value as they are
Metis-C1a: 73mm/s, Metis-C1b: 73mm/s
Feed CCW:Thick 1:Mid
Prevent shock jitter by adjusting sub scan scale, scale error rate declination,
005
image position accuracy improve. Reflect adjusted value as they are Metis-C1c:
108mm/s, Metis-C1d: 108mm/s, Metis-C1e: 108mm/s
System Maintenance Section
[0 or 1 / 1 / 0]
ENG 0: OFF
1: ON
*ENG [-2.0 to 2.0 / 0.9 / 0.1%/step]
*ENG [-2.0 to 2.0 / 0.9 / 0.1%/step]
*ENG [-2.0 to 2.0 / 1.1 / 0.1%/step]
*ENG [-2.0 to 2.0 / 1.2 / 0.1%/step]
*ENG [-2.0 to 2.0 / 1.2 / 0.1%/step]
2-125
Main SP Tables-1
D146/D147/D148/D149/D150