Ricoh D146 Service Manual page 610

Service Call 816-899
SC No. Level
SC860-00 B
D146/D147/D148/D149/D150
Error Name/Error Condition/Major Cause/Solution
HDD startup error at main power on (HDD error)
§
The HDD is connected but the driver detected the following
errors.
§
SS_NOT_READY:/* (-2)HDD does not become
READY*/
§
SS_BAD_LABEL:/* (-4)Wrong partition type*/
§
SS_READ_ERROR:/* (-5)Error occurred while reading
or checking the label*/
§
SS_WRITE_ERROR:/* (-6)Error occurred while writing
or checking the label*/
§
SS_FS_ERROR:/* (-7)Failed to repair the filesystem*/
§
SS_MOUNT_ERROR:/* (-8)Failed to mount the
filesystem*/
§
SS_COMMAND_ERROR:/* (-9)Drive not responding to
command*/
§
SS_KERNEL_ERROR:/* (-10)Internal kernel error*/
§
SS_SIZE_ERROR:/* (-11)Drive size too small*/
§
SS_NO_PARTITION:/* (-12)The specified partition
does not exist*/
§
SS_NO_FILE:/* (-13)Device file does not exist*/
§
Attempted to acquire HDD status through the driver but
there has been no response for 30 seconds or more.
§
Unformatted HDD
§
Label data corrupted
§
HDD defective
Format the HDD through SP mode.
5-136 SM