Ricoh D146 Service Manual page 1826

Code
0-08 The other end sent RTN or
PIN after receiving a page,
because there were too many
errors
0-14 Non-standard post message
response code received
0-15 The other terminal is not
capable of specific functions.
D163
Meaning Suggested Cause/Action

Check the line connection.

Replace the FCU.

The other end may have jammed, or run
out of paper or memory space.

Try adjusting the tx level and/or cable
equalizer settings.

The other end may have a defective
modem/FCU; try sending to another
machine.

Check for line problems and noise.
Cross reference

Tx level - NCU Parameter 01 (PSTN)

Cable equalizer - G3 Switch 07 (PSTN)

Dedicated Tx parameters in Service
Program Mode

Incompatible or defective remote terminal;
try sending to another machine.

Noisy line: resend.

Try adjusting the tx level and/or cable
equalizer settings.

Replace the FCU.
Cross reference
See error code 0-08.
The other terminal is not capable of accepting
the following functions, or the other terminal's
memory is full.

Confidential rx

Transfer function

SEP/SUB/PWD/SID
50 SM