Ricoh D146 Service Manual page 1605

Procedure
Display contents
On the above screen, two programs, i.e., engine firmware and printer application are
displayed. (The screen may change depending on the firmware or application).
The display contents are as follows:
Display
ROM:
NEW:
* The upper row corresponds to the module number, the lower row corresponds to the
version name.
8. Select the module with the module selection button or 10 key operation. The selected module
is highlighted, and [Verify] and [Update] are displayed.
§
Depending on the combination of update software, it may not be possible to select
simultaneously.
Key or button operations
Keys or buttons to press
[Update] or [#] key
[Verify] button or [./*] key
9. Press the [Update] or [#] key, and perform software update.
10. During firmware update, a "firmware update/ verification progress screen" is displayed. When
firmware update is complete, a "firmware update end screen" is displayed.
D146/D147/D148/D149/D150
Display installed module number / version information.
Display module number / version information in the card.
Update the ROM of the selected module.
Perform verification of the selected module.
Contents
Contents
5-6 System Maintenance Section