Ricoh D146 Service Manual page 1546

Detects remaining toner amount.
*Power with SP5-804-173 before checking.
(0: End, 1: Not End)
Toner End Sensor:K
037
Detects remaining toner amount.
*Power with SP5-804-172 before checking.
(0: End, 1: Not End)
Fusing:Area Detection
038
Detects region of fusing unit.
(0111: 200V system, 1011: 100V System)
Fusing:New Unit Detection
039
Detects New/Old of fusing unit.
(0: New, 1: Old)
Fusing Temp Detect
040
Detects whether high temperature is detected from fusing unit.
(0: Normal, 1: High temperature)
Fusing Temp Detect 2
041
Detects whether high temperature is detected from fusing unit.
(0: Normal, 1: High temperature)
System Maintenance Section
[0 or 1 / 0 / 1/step]
ENG 0: End
1: Not End
[0 to 15 / 0 / 1/step]
ENG 0111:200V system
1011:100V System
[0 or 1 / 0 / 1/step]
ENG 0: New
1: Old
[0 or 1 / 0 / 1/step]
ENG 0: Normal
1: High temperature
[0 or 1 / 0 / 1/step]
ENG 0: Normal
1: High temperature
3-7 D146/D147/D148/D149/D150
Input Check Table