Ricoh D146 Service Manual page 1644

6. "Finish" appears on the touch panel display, then remove the SD card.
§
If 'failed' appears on the touch panel display, turn the power off, and then recover
from step 1 again.
The debug logs are saved with the following file names.
Controller debug log (GW
debug log)
Engine debug log
Operation panel debug log
System Maintenance Section
/LogTrace/machine
number/watching/yyyymmdd_hhmmss_unique
identification number.gz
/LogTrace/machine
number/engine/yyyymmdd_hhmmss.gz
/LogTrace/machine
number/opepanel/yyyymmdd_hhmmss.tar.gz
11-5
Retrieving the Debug Logs
D146/D147/D148/D149/D150