Ricoh D146 Service Manual page 1554

PCU Lubricant End Sensor:C
092
Not available with C1
PCU Lubricant End Sensor:K
093
Detects whether lubricant of PCU(K) is end or not.
(0: Not end, 1: End)
*Only available with c/d/e models.
GAVD Open/Close Detection
094
For checking door open/close during process. No need to operate.
Bridge 24V Fuse Detection
095
Detects state of 24V fuse on the bridge unit.
(0: Not cut, 1: Cut)
Bridge 5V Fuse Detection
096
Detects state of 5V fuse on the bridge unit.
(0: Not cut, 1: Cut)
Fusing Shading Plate Sensor
/1
097
Detects position of fusing shade plate.
(0: Not shading 1: shading)
Fusing Shading Plate Sensor
/2
098
Detects position of fusing shade plate.
(0: Not shading 1: shading)
System Maintenance Section
ENG [0 or 1 / 0 / 1/step]
[0 or 1 / 0 / 1/step]
ENG 0: Not end
1: End
ENG [0 or 1 / 0 / 1/step]
[0 or 1 / 0 / 1/step]
ENG 0: Not cut
1: Cut
[0 or 1 / 0 / 1/step]
ENG 0: Not cut
1: Cut
[0 or 1 / 0 / 1/step]
ENG 0: Not shading
1: shading
[0 or 1 / 0 / 1/step]
ENG 0: Not shading
1: shading
3-15 D146/D147/D148/D149/D150
Input Check Table