Simultaneous Use Of Many Units By One Operator; Table 2-3 Camera Groups - Honeywell Rapid Eye Operator's Manual

Live Video

Simultaneous Use of Many Units by One Operator

48
Table 2-3 Camera Groups
Group
A
B
C
D
Sessions
• If ten operators open a live session on one Rapid Eye unit, an eleventh operator
cannot. However, that operator can open another type of session (such as retrieval,
event, data, alarm, or motion).
• For Multi-Media LT units, the number of simultaneous View operators may be less.
Streams
Up to 32 live video streams are available.
• Two operators open a Live session to the same unit, and each operator monitors
video from 16 cameras. A third operator can open a Live session to the same unit, but
cannot monitor video because the 32 streams available are already in use.
• For live audio, up to ten operators running Live sessions could each hear the
channels of Live audio, and each could monitor all live data streams.
Up to 64 simultaneous connections to different units can be made by one operator. This
number can be lower due to the CPU of the PC that is running View, the PC's memory and
the number of other tasks currently running.
Only 6 Maintenance sessions can be active at the same time. When a View operator has
connected to 6 Maintenance sessions for different units at the same time, they will not be
able to connect to a seventh Maintenance session.
Audio Broadcast
Audio can be broadcast to many units simultaneously using the View application. To
broadcast, click Talk in more than one player before the microphone at the operator's PC.
Camera Port Number
1, 8, 11, 14
2, 5, 12, 15
3, 6, 9, 16
4, 7, 10, 13