3 Installation and Connections
This chapter explains how to install the HDD and connect the NVR to related devices.
HDD Installation
1. Pull out the HDD tray from the NVR.
•
Attempting to open or disassemble the unit may expose you to
dangerous voltage or other hazards and damage the unit.
•
Make sure to ground the cabinet of the NVR! The grounding screw is
on the rear panel of the unit.
It is recommended that you use SATA-II HDDs (500G and above).
Consult the vendor to get the latest compatible hard disk list.
2. Secure the HDD in the tray with the screws
provided in the package.
Honeywell
9