Table of Contents
Advertisement
What's in this section?
The following topics are covered in this section.
If the instrument is used in a manner not specified by Honeywell, the protection provided by the instrument
may be impaired.
2.1 Installing optional DSU software
If your instrument is equipped with the optional 120MB or Zip disk drive, you should have received a
floppy disk containing DSU.EXE, the Data Storage Utility. This software lets you use your PC to initialize
120MB or Zip disks for data storage in a fraction of the time it would take on the instrument.
To install the DSU.EXE onto your PC, simply copy the program onto your hard drive. You can create a
folder called "DSU" if you want.
2.2 Site Preparation
The instrument is a complex electronic device measuring low level electrical signals. Proper site preparation
and installation practices are important in achieving a trouble-free system. Our experience indicates that
many problems are the result of improper installation. Follow the procedures and recommendations in this
section to ensure a successful installation.
Consider the following items for each installation:
• Physical mounting and location
• Power line (mains) conditioning
• Grounding for personal safety
• Grounding for noise immunity
• Suppression of noise from electrically connected loads
• Suppression of noise from nearby (not connected) sources
• Proper connections and terminations of communications links
12/00
2. Installation
Topic
VPR & VRX - User Manual
Installation
Page
15
15
16
16
20
15
Advertisement
Table of Contents
