Table of Contents
Advertisement
Avoiding Installation Problems for Video
Spot-Checking Recorded Video
Document 800-07766V4 Rev A
01/2013
Figure 3-3
Select a Site on the Sites Tab, then Click Live
After a successful, quick connection, check the recorded video for hard-to-predict
situations. Changing environmental factors can compromise video at the source.
After a day or two, run a retrieval session to look for artifacts in recorded video, at every
half-hour or so, over a 24-hour period.
Sun
The darkness of night or bright sunlight may indicate the need for changes in camera
position or lighting. For outdoor cameras, it can be worthwhile to run such spot checks
seasonally. Direct sunlight at short times during the day, such as daybreak, can interfere
with recording for cameras aimed east, as can sundown for cameras pointing west.
After use of PTZ
A camera with the ability to pan, tilt and zoom can be set to respond in a
variety of ways after use and should be spot-checked. Run a Retrieval session to do so.
Scheduling
The video archive can be spot-checked for recorded video when cameras are
scheduled to record it. Refer to Scheduling in the
Digital Video Recorders System Administrator
Rapid Eye™ Hybrid LT DVR Installation Guide
Rapid Eye™ Hybrid HD and Hybrid LT
Guide.
Tear-away
Player
window
Player
toolbar
Image
from video
feed
45
Advertisement
Table of Contents
