Updating The Cameras - Honeywell MAXPRO Operator's Manual

C O N F I G U R I N G M A X P R O N V R
3
Figure 3-6
Note:
Note:
10.
Note:
U
PDATING THE
You can modify the settings of a camera to change the camera name, IP address, camera
type, fixed/PTZ, advanced camera settings, and so on. You can update the camera settings
only if you have admin rights.
To update a camera
1.
2.
3.
4.
46
RTSP Settings
• Type the RTSP URL. Click
to different camera types.
The Help that opens lists only a few manufacturers. Most cameras are RTSP, and
all RTSP 3rd party cameras can be configured. If the RTSP URL format for a
particular camera type is not listed in the Help, then the URL format can be
obtained from the camera manufacturer.
• Click Get Configuration to get the resolution and compression format for the
camera.
For RTSP, all settings like FPS must be configured on the camera web page.
Click Save.
If a particular camera is not discovered by the system, you can add it manually by
clicking New.
C
AMERAS
Click the Configurator tab. The System page displays by default.
Click the Camera tab to navigate to the Camera page. The list of cameras configured are
displayed.
Select the row corresponding to the camera you want to modify.
Change the settings such as camera name, IP address, and so on.
for help on RTSP URLs format that can be assigned
MAXPRO NVR Operator's Guide