Switching The Display Format (Rms/Avg/Peak) Of The Measured Value - NF DP015S Instruction Manual

Table 3-11 Main Measurement Functions (continued)
Item
PF Power factor
CF Crest factor
F Synchronization frequency

3.4.10 Switching the Display Format (RMS/AVG/Peak) of the Measured Value

You can switch the display format of the measured value (RMS/AVG/Peak) for the output voltage
and output current. The items which are displayed in each measuring mode are shown in Table 3-12.
Table 3-12 The Measuring Mode for the Measured Values of the Output Voltage and
Measuring
mode
RMS
AVG
Peak
 Operation procedures using soft-keys
1. Press the [Measure] soft-key and select [2:Measure]. The [Measure] window opens.
DP Series
The power factor of the load. The power
factor of the phase is displayed when in
the phase voltage display in the
polyphase model and polyphase system.
It is not displayed when in the line
voltage display.
The crest factor of the output current
(peak value/effective value). It is not
displayed for the line voltage display in
the polyphase model and polyphase
system.
The measured frequency value of the
synchronization signal source when the
signal source is SYNC.
Output Current
Items to be Displayed
(Output Voltage, Output Current)
V, I, Ipk-Hold
Vavg, Iavg, Ipk-Hold
Vmax, Vmin, Imax, Imin, Ipk-Hold
3.4 Using the Continuous Function
Description Unit
—
—
Hz
59