Execute A Sequence - NF DP015S Instruction Manual

4.2.7 Execute a Sequence

The edited sequence can be executed after converted to executable program by compile operation.
 Transition to Sequence Control View
When pushing [Compile] soft-key in the Sequence Edit View, the edited sequence is compiled, and
then the screen transitions to Sequence Control View.
Sequence Edit View
シーケンス編集画面
-------- Notes----------------------------------------------------------------------------------------------------------------
 If an improper setting is detected during compilation, an error message is displayed and the
screen does not transition to the Sequence Control View.
---------------------------------------------------------------------------------------------------------------------------------
 Start/Terminate a sequence
1. When an output is turned on in the Sequence Control View, a sequence can be executed. At this
point, the output is in the state set in the step No. 0 (icon
DP Series
4.2 Using Sequence Function
Sequence Control View
シーケンス制御画面
is displayed).
Sequence Control View
出力オフ状態のシーケンス
under output off state. When
制御画面です。出力をオン
the output is turned on,
に す る と ， ソ フ ト キ ー
[Start] soft-key is displayed,
[Start] が表示され，シーケ
and the sequence start
ンスの開始操作を行うこと
operation can be executed.
ができます。
89