Features; Table 1-3 Polyphase System Configuration List - NF DP015S Instruction Manual

1. Outline
1.3

Features

 Various interfaces to address a variety of usage
In addition to RS232, USB, and GPIB (optional) to use for the remote controlling from a computer
or sequencer, you can use a contact/TTL signal to turn the output on/off or switch the memory
without using a computer. The product also offers the status output for showing the device status
and the output which is synchronized with Sequence or Simulation (optional) step. With these
functions you can achieve various types of systemization and automatization. The AGC function
(optional) and Autocal function for calibrating the output voltage drop are also provided.
 Variable current limiter
This function can limit the effective value and the positive/negative peak value of the output current
where the limiting value is variable. You can set the limiter so that the output is turned off when the
limited condition continues for a certain time.
 Globally adjustable power inlet without restricted by the power supply environment
The DP series supports a wide range of power input from 100 V to 230 V. However, with the model
of which the output capacity is 6 kVA or more, the output power capacity will be limited when the
power input is 170 V or less.
 Feature-rich measurement function
On the panel the product displays the effective value, peak value, average DC value, current
peak-hold value, and active/apparent power of the output voltage/current. Furthermore, the power
factor, crest factor, reactive power, and harmonic current are also measured and displayed by
additional options.
4

Table 1-3 Polyphase System Configuration List

PROGRAMMABLE AC POWER SOURCE