Turning The Output On Or Off Rapidly; Table 4-13 The Output Terminal Impedance (Reference Values In The Rear Output Terminal) - NF DP015S Instruction Manual

4. Advanced Operation
3. Set the gain in the [Gain] item.
4.21

Turning the Output On or Off Rapidly

In the factory default settings, the internal output relay of this product is activated linking to the
output on/off. In the output off state, the internal circuit, output terminal, and the outlet of this
product are physically separated. On the other hand, if the output relay chattering causes any
problem, or if you want to turn the output on or off rapidly, you can disable the activation of the
output relay. In that case, the output relay is fixed to the on state and the operation to turn the output
on/off is performed by the semiconductor device. The output off state means the state of high
impedance. Table 4-13 shows the list of the output terminal impedance (reference values in the rear
output terminal) in the output off state when the output relay control is disabled.
Table 4-13 The Output Terminal Impedance (Reference Values
in the Rear Output Terminal) in the Output Off State when the Activation of the Output
Single-phase/Polyphase
Model
Single-phase model
(Hi to Lo)
Polyphase model (L1 to N, L2 to N, L3 to N)
* N indicates the number of the power units energized.
184
Relay is Disabled
Outlet
AC/DC mode
Type
AC and ACDC
For Japan/North
America
NEMA 5-15
AC and ACDC
For Europe
CEE 7
100 V range
200 kΩ 200 kΩ
modes
4N + 3 4N + 3
200 kΩ 200 kΩ
DC mode
4N + 1 4N + 1
200 kΩ 200 kΩ
modes
4N + 3 4N + 3
200 kΩ 200 kΩ
DC mode
4N + 1 4N + 1
200 kΩ 200 kΩ
4N + 1 4N + 1
PROGRAMMABLE AC POWER SOURCE
200 V range
200 kΩ 200 kΩ
2N + 1 2N + 1
200 kΩ 200 kΩ
2N + 1 2N + 1
200 kΩ 200 kΩ
2N + 3 2N + 3
200 kΩ 200 kΩ
2N + 1 2N + 1
200 kΩ 200 kΩ
2N + 1 2N + 1