Menu Composition; Menus Of The Continuous Function; Figure 5-2 Menu Composition; Table 5-5 Menus Of The Continuous Function - NF DP015S Instruction Manual

5. Description of Screen and Menu
5.2

Menu Composition

The menu composition of this product is shown in Figure 5–2. Press the MENU key to move to the
root menu.
Continuous
－Osc
－Measure
－Misc
－Limiter

5.2.1 Menus of the Continuous Function

The menus of the Continuous function are shown in Table 5-5. You can open each menu by using a
soft-key.
Menu
Osc 1: AC/DC
2: Source
3: Range
4: On/Off Phs
5: Target Phs
6: Phs Mode
Measure 1: Mode
2: Measure
3: CO
2
4: Harmonic
5: Disp Item
Misc 1: AGC/Acal
2: DC Adjust
202
Sequence
－Sequence Edit －Simulation Edit
－Sequence Control －Simulation Control

Figure 5-2 Menu Composition

Table 5-5 Menus of the Continuous Function

Switches the AC/DC mode.
Switches the signal source.
Switches the output voltage range.
Makes the on/off phase settings.
Switches the phase to be configured.
Sets the phase mode in the case of
polyphase output.
Switches the measured value display mode.
Makes the measured value display settings.
View Displays and sets the CO
Displays the harmonic current measured
values.
Selects display items in the Simple
measured value display mode.
Makes the AGC/Autocal function settings.
Sets the DC offset adjustment.
Root
Simulation Memory
－Setting Store
－Setting Recall
－ARB Copy
－SEQ Store
－SEQ Recall
－SIM Store
－SIM Recall
Description
emission.
2
PROGRAMMABLE AC POWER SOURCE
System
－Reset
－PwON Mode
－PwON Output
－Beep
－LCD
－Monitor
－Ext Control
－Remote
－Relay Cntrl
－USB Eject
－Trig Out
－PU-ON
－Information
－ExtOut Pol
Refer to
3.4.1
3.4.1
3.4.2
3.4.7
3.4.5
4.15
3.4.11
3.4.10,3.4.12,
3.4.13
4.21
4.4
3.4.11
4.12,4.13
4.14