Figure 2-1 How To Use The Adjuster Foot - NF DP015S Instruction Manual

2. Preparation before Use
Up
 About arrangement
Stacking arrangement
• The center of gravity becomes high, which
poses a risk of falling down.
• The product does not have a structure for
supporting a heavy load.
 Do not place the product on its side or back.
 Do not stack the product on top of the other, or place it in front or back of the other
(arrangement which makes the cabinet placed behind inhale the exhaust heat of the other).
 When you use multiple cabinets to form a polyphase system, there is no limitation regarding
the order of the phases to be arranged. Arrange them in your convenient order within the range
of the length of the System Cable.
10
Adjuster Foot
Down

Figure 2-1 How to Use the Adjuster Foot

The Adjuster Foot can be moved
up by turning it to left
(counterclockwise) as viewed from
above, and moved down by turning
it to right (clockwise). Move the
Adjuster Foot down by using a
spanner (19 mm diameter).
Tandem arrangement
• The product placed behind
another will be overheated by
exhaust heat, which reduces
the product's lifetime.
PROGRAMMABLE AC POWER SOURCE