Table 3-2 Component Name (Rear) - NF DP015S Instruction Manual

Number
1 External signal input
connector
2 Monitor output connector
3 SYSTEM I/O connector
4 CONTROL I/O connector
5 GPIB connector
6 RS232 connector
7 USB connector
8 Air outlet
9 Power input terminal
10 Power input cable holder
11 Output terminal
12 Output cable holder
13 Sensing input terminal
(Single-phase model,
Polyphase model)
14 Caster
15 Polyphase output terminal
(Multi-phase model)
16 Single-phase output terminal
(Multi-phase model)
17 Sensing input terminal
(Multi-phase model)
Note: † indicates an option.
DP Series

Table 3-2 Component Name (Rear)

Name
Used when controlling the voltage value
setting by the external signal (VCA),
when synchronizing the output frequency
with the external signal (SYNC), and
when outputting the amplified external
signal (EXT
Can observe waveforms of the output
voltage and output current when
connected to a unit such as oscilloscopes.
A System Cable
make multiple single-phase models into a
polyphase output system.
I/O connector used to control this product
externally by using the logic signal and
non voltage contact.
†
GPIB communication interface.
RS232 communication interface.
USB communication interface.
Air outlet for exhausting the heat.
Power input terminal.
Used to fix the power input cable.
Output terminal.
Used to fix the output cable.
Connect to the load end that is located in
the distance from the main unit to detect
its voltage.
Caster with the freely movable
front-wheels and fixed rear-wheels. Can
be used to move this product in the
horizontal location.
Output terminal for the single-phase
three-wire and three-phase four-wire.
Output terminal for the single-phase
two-wire.
Connect to the load end that is located in
the distance from the main unit to detect
its voltage. Common among the
single-phase two-wire, single-phase
three-wire, and three-phase four-wire
output.
3.1 Component Name
Description
† †
, ADD ).
†
can be connected to
Refer to
4.17,
4.19,
4.20
4.10
2.5.4
4.18
6.1.3
6.1.2
6.1.1
2.2
2.4
2.4
2.5
2.5
4.11
2.3
2.5.3
2.5.3
4.11
35