Menus Of The Sequence Function; Table 5-6 Menus Of The Sequence Function - NF DP015S Instruction Manual

Table 5-5 Menus of the Continuous Function (Continued)
Menu
Limiter 1: Ipk Limiter
2: Irms Limiter
3: V/F Limiter

5.2.2 Menus of the Sequence Function

The menus of the Sequence function are shown in Table 5-6. You can open each menu by using a
soft-key. For how to use the Sequence function, see 4.2.
Menu
Sequence Edit
Sequence Control
DP Series
Makes the peak current limiter settings.
Makes the RMS current limiter settings.
Sets the voltage/frequency setting range
limit.

Table 5-6 Menus of the Sequence Function

Osc Range Switches the output voltage range.
AC/DC Switches the AC/DC mode.
Misc Time Unit Switches the time unit between ms and s.
Trig Out Sets the trigger output.
File Store Saves to, clears, and renames the Sequence
Memory.
Recall Recalls the Sequence Memory.
Clear Resets the edited sequence to the factory default
settings.
Compile Compiles the edited sequence and moves to the
Sequence Control View.
Start Starts the sequence. It is displayed in the output on
and sequence stopped states.
Stop Ends the sequence. It is displayed in the sequence
running state.
Hold Suspends the sequence. It is displayed in the
sequence running state.
Resume Resumes the suspended sequence. It is displayed in
the sequence suspended state.
Bran1 Branches to a step of the branch 1. It is displayed in
the sequence running state.
Bran2 Branches to a step of the branch 2. It is displayed in
the sequence running state.
Measure Makes the measured value display settings. It is
displayed in the sequence stopped state.
Edit Displays the Sequence Edit View. It is displayed in
the output off state.
Description
Description
5.2 Menu Composition
Refer to
4.1.1
4.1.2
4.1.3,4.1.4
203