Power Unit Energization Setting - NF DP015S Instruction Manual

10. Specifications
Display of emission CO
Displayed items
Full scale
Resolution
Emission CO
2
coefficient

10.12 Power Unit Energization Setting

The power consumption can be decreased by decreasing the number of the power units in operation
according to the load capacity. Each power unit can be enabled (energized)/disabled (not energized)
separately. (1.5 kVA or 1.5 kW/power unit)
Number of units
Energizing
setting
Note: Can be set for only a model with more than one unit.
Number of units
(per phase)
Energizing
setting
Note: Can be set for only a model with more than one unit per phase.
254
2
Displays the instantaneous (kgCO
values for the internal loss and the output power
Instantaneous: 20 kgCO
Instantaneous: 0.001 kgCO
Variable (resolution 0.000001 tCO
Factory default: 0.000555 tCO
Single-phase model and Single-phase output of Multi-phase model
045S
015S 030S
045M
1 2 3
No
Polyphase model and Polyphase output of Multi-phase model
030D 060D
1 2
No
All models
/h) and integration (tCO
2
/h, Integration: 2000 tCO
2
/h, Integration: 0.000001 tCO
2
090S
060S 075S
090M
4 5
Yes
090D 120D
3 4
Yes
PROGRAMMABLE AC POWER SOURCE
, can be cleared)
2
2
2
/kWh)
2
/kWh
2
105S 120S
6 7 8
045T 090T
045M 090M
1 2
No Yes