2. Preparation before Use
2.1
Check before Use
Check the safety.
To ensure equipment operator's safety, be sure to read the following sections of the instruction
manual at the beginning.
Safety Precautions (Page ii)
2.4 Grounding and Power Connections
Check the appearance and contents.
If there is any problem, contact the seller (NF Corporation or our agent) from whom you purchased
the product.
Appearance check
Make sure that there is no damage or dent made during the transportation on the LCD screen,
keys, jog, or shuttle of the control panel, or rear connectors.
Contents (main unit and accessories) check
The contents are listed in Table 2-1. Make sure that all of the main unit and accessories are
included.
Main unit
Accessories
The GPIB option is built in the main unit.
2.2
About Installation Environment
To use safely and maintain the reliability, take the followings into consideration:
Install the product where the exhaust heat will not damage surroundings.
This product performs forced air cooling using a fan. Keep the front and rear, on which the air
inlet and outlet are located, away from the wall at least 50 cm to secure air circulation.
This product exhausts the heat from the air outlet on the rear. Do not place heat-sensitive
objects around the outlet.
If you install the product in a closed narrow room, air conditioning equipment is required. The
heat value of this product is shown in Table 2-2 (estimate at power input 200 V, rated output).
8
Table 2-1 List of Content
Content
Main unit
Instruction Manual
CD-ROM
Contents: Control Software for DP Series, LabVIEW Driver,
Instruction Manual (Remote Control), Control Software for
DP Series Instruction Manual
Power cable (3 m approx.)
PROGRAMMABLE AC POWER SOURCE
Quantity
1
1
1
1