Clearing The Output Current Peak-Hold Value - NF DP015S Instruction Manual

 Selecting the measured value being displayed in the Simple View mode (procedure 2)
In the Simple View mode, hover the cursor over the measured value item and press the ENTER key.
The selection box for choosing display items opens.

3.4.12 Clearing the Output Current Peak-hold Value

The output current peak-hold value is the maximum absolute value of the measured output current
peak value, which is then updated appending signs and held. This held value can be cleared. After
the held value is cleared, it is updated with the value measured after that. The held value is cleared
when the power is turned off.
 Operation procedures using soft-keys
1. Press the [Measure] soft-key and select [2:Measure]. The [Measure] window opens.
DP Series
3.4 Using the Continuous Function
63