Saving Simulation - NF DP015S Instruction Manual

4. Advanced Operation
3. When [Stop] soft-key is pushed while simulation is executed, the execution transitions to the
output that is set in the Initial Step, and then simulation is terminated.
-------- Notes----------------------------------------------------------------------------------------------------------------
 In the output off state, the simulation cannot be started.
 The output on/off phase setting is invalid for the Simulation.
---------------------------------------------------------------------------------------------------------------------------------
 Returning to Simulation Edit View
When pushing [Edit] soft-key that is displayed in output off state, the screen returns to the
Simulation Edit View.

4.3.8 Saving Simulation

-------- Notes----------------------------------------------------------------------------------------------------------------
 Simulation cannot be saved in the Simulation Control View.
---------------------------------------------------------------------------------------------------------------------------------
116 PROGRAMMABLE AC POWER SOURCE