Output And System Cable Connection; Single-Phase Model; Table 2-6 Output Terminals - NF DP015S Instruction Manual

2.5

Output and System Cable Connection

 Before connecting, check the followings.
WARNING
 Before touching the output terminal, be sure to turn off the power switch of this product, and cut
the power to the distribution board. Otherwise, an electric shock might occur.
CAUTION
 The output terminals that can be grounded are the Lo or N terminals. Do not ground the Hi, L1,
L2, and L3 terminals.
 About output terminal
DP015, DP030,
DP045, DP060
Screw

2.5.1 Single-phase Model

 Connection procedure
1. Remove the resin-molded output terminal cover and the output cable holder of the output
terminal.
DP Series

Table 2-6 Output Terminals

DP090D, DP090T,
DP120D,
DP090M (polyphase output)
M6

2.5 Output and System Cable Connection

DP075S, DP090S,
DP105S, DP120S,
DP090M (single-phase output)
M8
17