Power On/Off; Before Turning On The Power - NF DP015S Instruction Manual

Table 3-3 Component Name (Control Panel) (continued)
Number
12 I key
13 SHIFT key
14 SHIFT LED
15 Numeric keypad
16 Arrow key
17 Jog
18 Shuttle
19 ENTER key
20 CANCEL key
3.2

Power On/Off

3.2.1 Before Turning on the Power

This product can output AC 310 V/DC 440 V at a maximum for a single-phase output in a
single-phase model or Multi-phase model. In a single-phase three-wire model, a single-phase
three-wire output in a Multi-phase model, or in a single-phase three-wire system, it can also output
AC 620 V at a maximum between the wires. The wrong operations may cause the electric shock or
result in malfunction of your load. Please check the following before starting operations.
 When you use this product for the first time, we recommend you to perform the test operation
without any connection to the output (without loads) while the instruction manual at your side.
 Double-check the connection to the power supply. Ensure that the cable is appropriate for the
input current and firmly connected.
 Double-check the connection to the output. Ensure that the cable is appropriate for the output
current and firmly connected.
DP Series
Name
Opens the RMS current limiter set window.
Turns on or off the shift state, which
enables Shortcut operations.
Illuminates when the shift state is turned on.
Used to enter a value directly.
Used to move across the items or
incrementing/decrementing the value by
one step.
Used to move across the items or
incrementing/decrementing the value by
one step.
Used to move across the items in the
selection box or incrementing/decrementing
the value. The greater the turning angle is,
the faster you move or
increment/decrement.
Confirms the selection.
Returns to the previous state without
confirming the selection. The numerical
entry box is closed when the value was
incremented or decremented using the jog,
shuttle, or arrow key.
Description
3.2 Power On/Off
Refer to
4.1.2
3.3.7
3.3.7
3.3.5
3.3
3.3
3.3
3.3
3.3
37