Ac Output - NF DP015S Instruction Manual

10.5

AC Output

[V]=Vrms, [A]=Arms, and the power supply input voltage is 200 V, unless otherwise noted.
Mode
Rated output
voltage
Voltage setting
range
Setting
resolution
Voltage accuracy *1
Maximum current
*2
Maximum peak
current
*3
Power capacity
*4
Load power factor
Frequency setting
range
Setting
resolution
Frequency accuracy
Frequency stability
*5
Voltage frequency
characteristic
*6
Output waveform
Output on phase
Output off phase
DC offset *7
*1: In the case of 10 V to 150 V/20 V to 300 V, sine wave, no load, 45 Hz to 65 Hz, DC voltage
setting 0 V, 23 °C±5 °C.
*2: If the output voltage is higher than the rated value, this is limited (lowered) to satisfy the power
capacity. If there is the DC superimposition, the active current of AC+DC satisfies the
maximum current. In the case of 40 Hz or lower or 400 Hz or higher, and that the ambient
temperature is 40°C or higher, the maximum current may decrease.
*3: For the capacitor input type rectified load (crest factor=4), the rated output voltage, and 45 Hz
to 65 Hz.
*4: In the case that the power input is 170 V or lower, models with 6 kVA or higher have the limit
on the power capacity.
*5: For 45 Hz to 65 Hz, the rated output voltage, no load and the resistance load for the maximum
current, and the operating temperature.
*6: For 40 Hz to 550 Hz, sine wave, the rated output voltage, the resistance load for the maximum
current at 55 Hz, and 55 Hz reference.
*7: In the case of the AC mode and 23°C±5°C.
DP Series
Single-phase model and Single-phase output of Multi-phase model
045S
015S 030S
045M
Floating output, the Lo terminal can be grounded.
0.0 V to 155.0 V / 0.0 V to 310.0 V
0.0 Vp-p to 440.0 Vp-p / 0.0 Vp-p to 880.0 Vp-p (arbitrary wave)
15 A / 30 A / 45 A /
7.5 A 15 A 22.5 A
Peak value which is four times of the maximum current (Apk)
1.5 kVA 3 kVA 4.5 kVA
0 to 1 (phase lead or phase lag, 45 Hz to 65 Hz, external power injection and
regeneration are not available.)
sine wave, arbitrary wave (16 types), clipped sine wave (3 types)
0.0° to 359.9° variable (setting resolution 0.1°)
0.0° to 359.9° variable (setting resolution 0.1°, active/inactive selectable)
Within ± 20 mV (typ. fine adjustment available)
060S 075S
Single-phase two-wire
100 V / 200 V
0.1 V
± (1% of set + 0.6 V / 1.2 V)
60 A / 75 A /
30 A 37.5 A
6 kVA 7.5 kVA
40 Hz to 550 Hz (AC mode)
1 Hz to 550 Hz (AC+DC mode)
0.1 Hz
±0.01% of set (23 °C±5 °C)
±0.005%
±1%
10.5 AC Output
090S
105S 120S
090M
90 A / 105 A / 120 A /
45 A 52.5 A 60 A
9 kVA 10.5 kVA 12 kVA
245