Figure 2-1 How To Use The Adjuster Foot; Table 2-4 Mass Of Dp Series; Table 2-5 Mass Of Dp Series Type R - NF DP Series Instruction Manual

 Install the product on a sturdy place.
 The floor needs to have enough strength to support the weight of this product. The mass of DP
series is shown in Table 2-4. Also the mass of DP series Type R is shown in Table 2-5.
Model
DP015S
DP030S
DP045S
DP060S
Single-phase
DP075S
DP090S
DP105S
DP120S
Model
DP015RS
DP030RS
DP045RS
Single-phase
DP060RS
DP075RS
DP090RS
 Do not install this product on a sloped surface. The Adjuster Foot is only for temporary fixing,
and cannot support the unit's own weight. You also must not lean on this product or use it as a
support. How to use the Adjuster Foot is shown in Figure 2–1.
Up
DP Series/DP Series Type R

Table 2-4 Mass of DP series

Mass
38 kg approx.
50 kg approx.
70 kg approx.
82 kg approx.
110 kg approx.
125 kg approx.
140 kg approx.
155 kg approx.

Table 2-5 Mass of DP series Type R

Mass
50 kg approx.
80 kg approx.
90 kg approx.
130 kg approx.
150 kg approx.
170 kg approx.
Adjuster Foot
Down

Figure 2-1 How to Use the Adjuster Foot

2.2 About Installation Environment
Model
DP030D
DP060D
Single-phase
three-wire DP090D
DP120D
DP045T
Three-phase
DP090T
DP045M
Multi-phase
DP090M
Model
DP030RD
Single-phase
DP060RD
three-wire
DP090RD
DP045RT
Three-phase
DP090RT
The Adjuster Foot can be moved up by
rotating it counterclockwise and moved
down by rotating it clockwise as viewed
from above.
Use an open-end wrench of 19 mm
width.
Mass
50 kg approx.
82 kg approx.
122 kg approx.
155 kg approx.
70 kg approx.
125 kg approx.
75 kg approx.
130 kg approx.
Mass
80 kg approx.
130 kg approx.
170 kg approx.
90 kg approx.
170 kg approx.
13