Restoring motorcycle operation via
the PIN CODE
In case of key acknowledgement system or key
malfunction, the instrument panel allows the user to
enter his/her own PIN code to temporarily restore
motorcycle operation.
If the PIN code has been activated using the "PIN"
function in the "SETTING MENU" (see page 156), the
instrument panel displays "INSERT" (A) and "PIN"
for a few seconds, then displays the spaces for
entering the four digits of the PIN.
Entering the code:
The first digit (B) flashes and the number can be
●
changed from 0 to 9 using buttons (1) and (2).
Press ENTER (3) to confirm and move on to the
●
following digit.
Repeat the procedure until entering all 4 digits.
●
Once the fourth digit is set, press ENTER (3) and the
instrument panel behaviour will be as follows:
if there is a problem during PIN check, the
●
instrument panel displays "TIME OUT" for a few
seconds, then switches to the main screen with
engine start disabled.
74
A
B
1
2
3
Fig 36