Entering Pin Code Function For Vehicle Release - Ducati Hypermotard Owner's Manual

Entering PIN CODE function for vehicle
release
This function provides vehicle temporary starting in
the event of an engine lock due to the Immobilizer
system malfunctioning.
If upon Key-On an Immobilizer ERROR is present, the
instrument panel will automatically enable the PIN
entering function.
Entering the code:
- each time you press button (2), the highlighted
number increases from 0 to 9 and back to 0,
press button (4) to confirm;
- repeat this procedure until entering the fourth
digit.
- Press button (4) again to confirm.
If code is wrong, the instrument panel will display the
"WRONG" indicator for 2 seconds and then will
display again the starting indicator to repeat the PIN
code entering procedure.
If code was correctly entered, the instrument panel
will display the "CORRECT" indicator for 2 seconds.
After 2 seconds, the instrument panel will return to
the "normal" view (with all indications active).
116
Note
PIN code entering can be repeated as many
times as you want; nevertheless, instrument panel
will automatically turn off 120 seconds after
attempting to enter the PIN code and the "TIME OUT"
indicator will be displayed for 2 seconds. Instrument
panel will then go back to the main page.