Controls; Figure 1-8 Front Panel Controls And Indicators - Silicon Graphics Altix XE250 User Manual

1: Introduction

Controls

1-12
The front panel controls and indicators (refer to
• Power/Reset - The two push-buttons located on the front of the chassis are (in order from
left to right) a reset button and a power on/off button.
Use the reset button to reboot the system. The the main power button is used to apply or turn
off the main system power. Turning off system power with this button removes the main
power but keeps standby power supplied to the system.
Overheat/Fan fail
Power fail
NIC1/NIC2
Figure 1-8
Front Panel Controls and Indicators
Figure 1-8) are described below:
Power
Reset
HDD
Power
RESET
007-5467-001