Table of Contents
Advertisement
Onboard GLAN1/Onboard GLAN2 (Gigabit- LAN) OPROM Configure
Default Primary Video Adapter
Emulated IRQ Solutions
PCIe I/O Performance
PCI Fast Delayed Transition
Reset Configuration Data
Frequency for PCI-X 1 and 2
007-5467-001
Enabling this option provides the capability to boot from GLAN Port 1 or GLAN Port 2. The
options are Disabled and Enabled.
This feature allows the user to specify which video adapter is to be used as the default primary
video adapter: the onboard video adapter or others. The options are Other and Onboard Video.
The options are Disabled and Enabled.
Some add-on cards perform faster with the coalesce feature, which limits the payload size to 128
bytes, while others perform faster with a payload size of 256 bytes, which inhibits coalesce
features. Please refer to your add-on card user guide for the desired setting. The options are
Payload (256 bytes) and Coalesce Enabled (128 bytes).
Enable this function to improve the DMA data transfer rate for a PCI 32-bit multimedia card. The
options are Enable and Disabled.
If set to Yes, this setting clears the Extended System Configuration Data- (ESCD) area. The
options are Yes and No.
This option allows the user to change the bus frequency for the devices installed in the slot
indicated. The options are Auto, PCI 33 MHz, PCI 66 MHz, PCI-X 66 MHz, PCI-X 100 MHz,
and PCI-X 133 MHz.
Advanced Setup
5-125
Advertisement
Table of Contents
