Table of Contents
Advertisement
B: IPMI 2.0 Management Utility
B-188
Refer to
Figure
B-13.
•
IP Auto Configuration: Click on the box to activate the selection menu and select a desired
item from the list. The options are None, DHCP, and BOODP.
•
Preferred Host Name (DHCP only): Enter a Preferred Host Name in the box.
•
IP Address: Enter the IP Address for the remote host in the box.
•
Subnet Mask: Enter the net mask of the local network in the box.
•
Gateway IP Address: Enter the local network router's IP address in this box for the
accessibility of the users that are not connected to the local network.
•
Primary DNS Server IP Address: Enter the IP Address of the Primary Domain Name
Server in the box.
•
Secondary DNS Server IP Address: Enter the IP Address of the Secondary Domain Name
Server in the box. It is used when the Primary DNS Server cannot be contacted.
•
Network Miscellaneous Setting: This field enables you to configure the following Network
Miscellaneous settings as listed below:
•
Remote Console & HTTPS Port: Enter the port numbers the remote host and the HTTP
server are listening. If a number is not entered in the box, the default value is used.
•
HTTP Port: Enter the port number the HTTP server is listening. If a number is not entered
in the box, the default value is used.
•
SSH Port: Enter the port number the SSH server is listening. If a number is not entered in
the box, the default value is used.
•
Bandwidth Limit: Enter the maximum bandwidth value for network interfacing. The value
should be in Kbits per second.
•
Enable SSH Access: Click this box to enable SSH Access.
•
Disable Setup Protocol: Check this box to disable the function of Setup Protocol for the
BMC card.
•
LAN Interface Setting: This field enables you to configure the following LAN Interface
settings as listed below:
•
LAN Interface Speed: Click on the arrow on the right to activate the selection menu and
select a desired speed. The options are: Auto-detect, 10 Mega bits per second or 100 Mega
bits per second. If Auto-detect is selected, LAN Interface Speed is set at the optimized speed
based on the system configurations detected by the OS.
007-5467-001
Advertisement
Table of Contents
