Security - Silicon Graphics Altix XE250 User Manual

B: IPMI 2.0 Management Utility

Security

B-190
Refer to Figure B-14.
• Enable Dynamic DNS: Check this box to enable the Dynamic DNS service.
• Dynamic DNS Server www.dyndns.org: Click this link to access the DynDNS web site.
This is the server name where the DDNS Service is registered.
• DNS System: When Dynamic DNS is enabled, you can select from the options: Custom or
Dynamic from the selection menu. Select "Custom" to use your own system as the DNS
server. Select Dynamic to use the pre-configured Dynamic DNS as your server.
• Hostname: Enter the name you want to use for the remote host server.
• Username/Password: Enter the username and the password for the remote host user.
• Check time (HH:MM): Enter the time the BMC card first registers with the DNS server in
the HH:MM Format. (e.g. 07:25, 19:30).
• Check Interval: Enter the interval for the IPMI to report to the Dynamic DNS again.
• Delete Saved External IP Address: Click on the Delete Icon to delete the IP Address for an
external system that has been previous entered and saved.
Click on this function key to activate the Security settings.
007-5467-001