Default Settings; Table 5-1 Bios Default Settings - Silicon Graphics Altix XE250 User Manual

5: BIOS Settings

Default Settings

5-106
Table 5-1 lists the SGI Altix XE250 default BIOS settings.
Note: Some of the settings in
as a BIOS setting and cannot be changed. Examples are Extended Memory, CPU Speed, Fan
RPM, etc.
Table 5-1
BIOS Default Settings
Menu Item
Main
System Time
System Date
BIOS Date
> SATA Port 0
> SATA Port 1
> SATA Port 2
> SATA Port 3
> SATA Port 4
> SATA Port 5
MAIN / SATA Port
Type
Multi-Sector Transfers
LBA Mode Control
32 Bit I/O
Transfer Mode
Ultra DMA Mode
Table 5-1 are reported by the system and stored in flash memory
Setting
[08:36:58]
[01/29/08]
01/16/08
[None]
[None]
[None]
[None]
[None]
[None]
Auto
[16 Sectors]
[Enabled]
[Disabled]
[FPIO 4 / DMA 2]
[Mode 5]
Page
117
117
117
007-5467-001