Table of Contents
Advertisement
3: Advanced Node Board Setup
3-36
Caution: In step 5, do not drop the CPU on the socket. Do not move the CPU
!
horizontally or vertically, and do not rub the CPU against any surface or any of the
contacts which may damage the CPU and/or contacts.
5. Once aligned, carefully lower the CPU straight down into the socket.
6. Find the corner of the CPU that has a semi-circle cutout below a gold dot (CPU key). This
corner should be aligned with the cutout on the socket (socket key).
Gold dot
Socket key
Socket key
CPU key
CPU pin 1
Notched corner
7. With the CPU in the socket, inspect the four corners of the CPU to make sure that it is
properly installed.
8. Use your thumb to gently push the load lever down until it snaps into the retention clasp.
007-5467-001
Advertisement
Table of Contents
