Table of Contents
Advertisement
Legacy USB Support
Advanced Processor Options
CPU Speed
Frequency Ratio
Core-Multi-Processing
Machine Checking
Fast Strings Operations
Thermal Management 2
007-5467-001
This setting enables you to enable Legacy USB device support. The settings are Enabled and
Disabled.
This is a display that indicates the speed of the installed processor.
This feature enables you to set the internal frequency multiplier for the CPU. The options are:
Default, x12, x13, x14, x15, x16, x17 and x18.
Set to Enabled to use a processor's second core and beyond. (Please refer to Intel's web site for
more information.) The options are Disabled and Enabled.
Set to Enabled to activate the function of Machine Checking and allow the CPU to detect and
report hardware (machine) errors via a set of model-specific registers (MSRs). The options are
Disabled and Enabled.
To to Enabled to optimize code for string operations and a decrease in the time required to carry
out the string instruction.
Set to Enabled to use Thermal Management 2 (TM2), which will lower CPU voltage and
frequency when the CPU temperature reaches a predefined overheat threshold. Set to Disabled to
use Thermal Manager 1 (TM1), allowing CPU clocking to be regulated via CPU Internal Clock
modulation when the CPU temperature reaches the overheat threshold.
Advanced Setup
5-131
Advertisement
Table of Contents
Need help?
Do you have a question about the Altix XE250 and is the answer not in the manual?
Questions and answers