Watch Dog; Summary Screen; Memory Cache; Cache System Bios Area - Silicon Graphics Altix XE250 User Manual

Watch Dog

Summary Screen

Memory Cache

Cache System BIOS Area

Cache Video BIOS Area

Cache Base 0-512K

007-5467-001
turned on after a power loss. Select Last State to allow the system to resume its last state before
the power loss.
If enabled, this option automatically resets the system if the system is not active for more than 5
minutes. The options are Enabled and Disabled.
This setting enables you to Enable or Disable the summary screen, which displays the system
configuration during bootup.
This setting enables you to designate a reserve area in the system memory to be used as a System
BIOS buffer to allow BIOS to write (cache) its data into it. Select Write Protect to enable the
function and reserve this area for system BIOS ROM access only. Select Uncached to disable this
function and make this area available for other devices.
This setting allows you to designate a reserve area in the system memory to be used as a Video
BIOS buffer to allow the BIOS to write (cache) its data into this reserved memory area. Select
Write Protect to enable the function and reserve this area for the Video BIOS ROM access only.
Select Uncached to disable this function and make this area available for other devices.
If enabled, this feature will allow the data stored in the base memory area: block 0-512K to be
cached (written) into a buffer, a storage area in the Static DROM (SDROM), or to be written into
L1 or L2 cache inside the CPU to speed up CPU's operations. Select Uncached to disable this
function. Select Write Through to allow data to be cached into the buffer and written into the
system memory at the same time. Select Write Protect to prevent data from being written into the
base memory area of Block 0-512K. Select Write Back to allow the CPU to write data back
Advanced Setup
5-123