Mitel 6800i Series Administrator's Manual page 90

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide
KEY MAPPING
PARAMETER IN
MITEL WEB UI
Map Redial Key To
Map Conf Key To
NA
NA
3-23
PARAMETER IN DESCRIPTION
CONFIGURATION
FILES
map redial key to Sets the Redial key as a Speeddial key if a value is
entered for this parameter. If you leave this parameter
blank, the Redial key returns to its original functionality.
For more information on this feature, see
Mapping"
map conf key to Sets the Conf key as a Speeddial key if a value is entered
for this parameter. If you leave this parameter blank, the
Conf key returns to its original functionality.
For more information on this feature, see
Mapping"
map redial as dtmf The "Redial" key remappings has the same behavior as
the "Speeddial" key when the phone is idle. During an
active call the phone will send the custom number as
DTMF using the phone configured DTMF method
(inbound vs out-of-band RFC2833 vs SIP INFO).
When a user presses the Redial key, the mapped number
will be sent out as DTMF during an active call if the current
"map redial key to" parameter is configured to a number
and the "map redial as dtmf" parameter is set to "1".
For more information on this feature, see
Mapping"
Map redial as conf The "Redial" key remappings has the same behavior as
the "Speeddial" key when the phone is idle. During an
active call the phone will send the custom number as
DTMF using the phone configured DTMF method
(inbound vs out-of-band RFC2833 vs SIP INFO).
When a user presses the Conf key, the mapped number
will be sent out as DTMF during an active call if the current
"map conf key to" parameter is configured to a number
and "map conf as dtmf" parameter is set to "1".
For more information on this feature, see
Mapping"
on page 5-101.
on page 5-101.
on page 5-101.
on page 5-101.
"Speeddial Key
"Speeddial Key
"Speeddial Key
"Speeddial Key