Picture Id Feature; Dhsg Settings - Mitel 6800i Series Administrator's Manual

Hide thumbs Also See for 6800i Series:

Table of Contents

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide

PICTURE ID FEATURE

Note: Applicable to the 6867i and 6869i IP Phones only.

image server uri

DEFAULT VALUE

Note: Applicable to the 6865i, 6867i, and 6869i IP Phones only.

DEFAULT VALUE

CONFIGURATION FILES

startup.cfg, <model>.cfg, <mac>.cfg

Allows you to specify the server URI where pictures are stored for

display to the phone during incoming and outgoing calls, and in the

Directory, Callers List, and Redial List entries. The pictures are

dynamically retrieved from the centralized server for each call and

then locally cached in the phone to reduce network traffic.

If there is no picture on the central server for the dialed number

and/or Caller Id number, and Directory, Callers List, and/or Redial

List entry, the generic blue figure image is shown.

Pictures must be in ".png" format and 150pixels wide x 200pixels tall.

For the 6867i/6869i, the png can be 24-bit or 32-bit. The filenames

for pictures must be stored using the phone number as the filename

(for example, 9995551234.png).

• Entering no value for this parameter disables this feature.

• The "image server uri" parameter supports TFTP, FTP, HTTP,

Server URI String

image server uri: tftp://192.168.1.100

CONFIGURATION FILES

startup.cfg, <model>.cfg, <mac>.cfg

Enables and disables the DHSG headset support on the phone.

Note: The phones that support DHSG are the 6865i, 6867i, and 6869i.

For more information about installing a DHSG headset on your phone,

see your IP Phone-Specific Installation Guide.

0 (disable - DHSG support is OFF)

1 (enable - DHSG support is ON)