Mitel 6800i Series Administrator's Manual page 274

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide
On the IP phones, you can enable or disable a Time Server to be used to synchronize time on
the phones with the Timer Server you specify. An Administrator can use the IP Phone UI, Mitel
Web UI, or configuration files to enable/disable the Time Server and specify a Time Server 1,
Timer Server 2, and/or Time Server 3. A User can enable/disable the Time Server using the IP
Phone UI or Mitel Web UI only. The Time Server is enabled by default.
Note: Time syncs are performed every 4 hours.
Setting Time Server Using the Configuration Files
Use the following procedure to enable/disable the Time Server and optionally set the IP Address
of Time Servers 1, 2, and/or 3.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
"Time Server Settings"
Setting Time Server Using the IP Phone UI
Use the following procedure to set the Time Server and optionally set the IP Address of Time
Servers 1, 2, and/or 3.
IP PHONE UI
For the 6863i/6865i:
1. Press on the phone to enter the Options List.
2. Select Preferences->Time and Date.
3. Select Timer Server 1, Time Server 2, and/or Time Server 3.
4. Enter the IP address of the Time Server, in dotted decimal format. Use the available softkeys
to help you enter the information.
5. Click Done to save your changes.
For the 6867i/6869i:
1. Press
2. Select Time and Date -> Set Date and Time.
3. Ensure there is a checkmark in the box corresponding to the Use Network Time setting.
If there is no checkmark, press the
4. Press the 2 key to highlight Time Server 1, Time Server 2, or Time Server 3.
5. Using the keys on the dialpad, enter an IP address or domain name for the time server.
6. Press the Save softkey to save your changes.
5-28
on .
page A-50
to enter the Options List.
button to enable the Use Network Time setting.