Mitel 6800i Series Administrator's Manual page 555

CONFIGURING THE MAC ADDRESS/LINE NUMBER IN REGISTER
MESSAGE
CONFIGURATION FILES
For specific parameters you can set in the configuration files for enabling/disabling MAC
address and line number, see Appendix A, the section,
on page A-270.
MITEL WEB UI
1. Click on Advanced Settings->Global SIP->Advanced SIP Setting.
2. Enable the "Send MAC Address in REGISTER Message" field by checking the check box.
(Disable this field by unchecking the box).
3. Enable the "Send Line Number in REGISTER Message" field by checking the check box.
(Disable this field by unchecking the box).
4. Click Save Settings to save your settings.
Note: The session prompts you to restart the IP phone to apply the configuration
settings.
5. Select Operation->Reset and click Restart.
Advanced Operational Features
"Advanced Operational Parameters"
6-9