Mitel 6800i Series Administrator's Manual page 904

Hide thumbs Also See for 6800i Series:

Table of Contents

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide

hardkeyN value

DEFAULT VALUE

CONFIGURATION FILES

startup.cfg, <model>.cfg, <mac>.cfg

The value you would like to assign to the hard key you are

configuring. The "hardkeyN value" parameter can be set for the

following key types only:

• speeddial (you can enter a speeddial number for this field; optionally,

you can also enter a prefix for the speeddial value to allow the phone

to dial the prefix after you press the Speeddial key; you then enter

the rest of the number from the keypad on the phone).

• speeddialxfer

• speeddialconf

• speeddialmwi

• For speeddial the value is the phone number, extension, or prefix

number to enter for the key.

• For line the value is optional; for example L4.

• For blf the value is the extension you want to monitor.

• For spre the value is dependent on services offered by server.

• For xml you can specify a URI to use for this XML key. The

variables you can use with the XML softkey URI are:

$$SIPUSERNAME$$

$$SIPAUTHNAME$$

$$PROXYURL$$

$$LINESTATE$$

$$REMOTENUMBER$$

$$DISPLAYNAME$$

$$SIPUSERNAME$$

$$INCOMINGNAME$$

$$CALLDURATION$$

$$CALLDIRECTION$

Troubleshooting