Mitel 6800i Series Administrator's Manual page 614

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide
If using the "Login" key method, Administrators can define in the configuration files a
programmable key, top or bottom softkey, or expansion module key type as "hotdesklogin" or
configure a "Login" key using the Web UI.
Note: For details on how to configure softkeys and programmable keys using the
configuration files see
on page 224,
Creating a Login Key Using the Mitel Web UI
Use the following procedure to create a Login key using the phone's Web UI:
MITEL WEB UI
1. Click on Operation > Programmable Keys (6863i/6865i) or Softkeys and XML
(6867i/6869i)
2. Select from Key 1 through Key 3 (6863i) or Key 8 (6865i) on the programmable keys
or
Select from Key 1 through Key 20 (6867i) or Key 44 (6869i) on the top keys
or
Select from Key 1 through Key 18 (6867i) or Key 24 (6869i) on the bottom keys.
3. In the Type field, select Login to apply to the key.
4. (If available/optional) In the Label field, enter a label to apply to this key (e.g. Login)
5. Click Save Settings.
Configurable Login/Logout Security Behavior
Using the "hot desk high security" parameter, Administrators are able define whether or not
VDP users have to enter their credentials every time they want to log in and log out of the phone.
When the "hot desk high security" parameter is defined as "0" (disabled) and a user is logged
in to their VDP account, if a power loss occurs, upon recovery the phone will attempt to
automatically log in using the last set of credentials recorded by the phone.
Note: The last user name and password used to log in to a VDP account is encrypted
and stored on the phone.
6-68
"Softkey Settings‚" on page
and "Top Softkey Settings‚" on page 229
214, "Programmable Key Settings‚"
.