Mitel 6800i Series Administrator's Manual page 696

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide
PARAMETER –
tos priority map
DESCRIPTION
FORMAT
DEFAULT VALUE
RANGE
EXAMPLE
The following table identifies the default DSCP-to-priority mapping structure.
DSCP RANGE
0-7
8-15
16-23
24-31
32-39
40-47
48-55
56-63
A-37
CONFIGURATION FILES
startup.cfg, <model>.cfg, <mac>.cfg
This parameter is based on the Type of Service (ToS), Differentiated
Services Code Point (DSCP) setting for SIP (tos sip parameter),
RTP (tos rtp parameter) and RTCP (tos rtcp parameter). It is the
mapping between the DSCP value and the VLAN priority value for
SIP, RTP, and RTCP packets.
You enter the tos priority map value as follows:
(DSCP_1,Priority_1)(DSCP_2,Priority_2).....(DSCP_64,Priority_64)
where the DSCP value range is 0-63 and the priority range is 0-7.
Mappings not enclosed in parentheses and separated with a
comma, or with values outside the ranges, are ignored.
Integer
3 (based on the default ToS DSCP SIP setting of 26)
5 (based on the default ToS DSCP RTP setting of 46)
5 (based on the default ToS DSCP RTCP setting of 46)
0 to 63 (for DSCP)
0 to 7 (for SIP, RTP, and RTCP priorities)
tos priority map: (26,7)
DSCP PRIORITY
0
1
2
3
4
5
6
7