Mitel 6800i Series Administrator's Manual page 210

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide
MITEL WEB UI
1. For global configuration, click on Advanced Settings->Global SIP->Basic SIP Authen-
tication Settings.
2. Or, for per-line configuration, click on Advanced Settings->Line N ->Basic SIP Authen-
tication Settings.
Configure SIP Authentication Settings:
3. In the "Screen Name" field, enter the screen name that displays on the idle screen.
4. In the "Screen Name 2" field, enter the text you want to display on the phone under the
"Screen Name" on the idle screen.
Notes:
1. If other status messages display on the phone, such as "Network Disconnected",
2. Symbol characters are allowed (such as "#").
3. If the text is longer than the display width, than the display truncates the text to
5. In the "Phone Number" field, enter the phone number of the IP phone.
6. In the "Caller ID" field, enter the phone number of the IP phone.
4-63
the Screen Name 2 value does not display.
fit the display.