Mitel 6800i Series Administrator's Manual page 398

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide
CONFIGURATION
PARAMETER
hardkeyN value
hardkeyN line
In addition to the above basic parameters, the following supplementary parameters can also
be used for the hard keys:
CONFIGURATION
PARAMETER
hardkeyN locked
5-152
DESCRIPTION
The value you would like to assign to the hard key you are configuring.
The "hardkeyN value" parameter can be set for the following key types
only:
• speeddial
• line
• blf (6865i, 6867i, and 6869i only)
• spre
• xml
• park
• pickup
• blfxfer (6865i, 6867i, and 6869i only)
• speeddialxfer
• speeddialconf
• speeddialmwi (6865i, 6867i, and 6869i only)
• redial
• filter (6865i, 6867i, and 6869i only)
• paging
The line associated with the hard key you are configuring.
The "hardkeyN line" parameter can be set for the following key types only:
• speeddial
• blf (6865i, 6867i, and 6869i only)
• list (6865i, 6867i, and 6869i only)
• acd (6865i, 6867i, and 6869i only)
• park
• pickup
• lcr
• blfxfer (6865i, 6867i, and 6869i only)
• speeddialxfer
• speeddialconf
• speeddialmwi (6865i, 6867i, and 6869i only)
• redial
• filter (6865i, 6867i, and 6869i only)
DESCRIPTION
Locks the specified hard key on the IP phones. When enabled, the phone
locks the key with the provisioned local settings and prevents users from
changing or configuring the key.
Note: If no settings are configured locally but the "hardkeyN type" is defined
in a configuration file, the phone will lock the key with the key type defined
in the configuration file along with any values associated with the additional
"hardkeyN" parameters (i.e. "hardkeyN value" and "hardkeyN line").