Mitel 6800i Series Administrator's Manual page 208

Mitel 6800i Series SIP Phone Release 4.1.0 Administrator Guide
CONFIGURING BASIC SIP AUTHENTICATION SETTINGS
You can configure SIP authentication settings using the configuration files, the IP Phone UI, or
the Mitel Web UI.
Note: To configure the SIP settings per-line, use the configuration files or the Mitel Web
UI.
CONFIGURATION FILES
For specific parameters you can set in the configuration files, see Appendix A, the section,
Basic, Global Settings"
parameters you can set in the configuration files for call waiting, see the section,
on
Settings" page A-71
Reference
For more information about setting the call waiting parameters, see Chapter 5, the section,
"Call Waiting" on
IP PHONE UI
For the 6863i/6865i:
1. Press on the phone to enter the Options List.
2. Select Administrator Menu.
3. Select SIP Settings.
4. Select User Name to enter the username that appears in the name field of the SIP URI.
This user name is also used for registering the phone at the registrar.
Note: The IP phones allow usernames containing dots ("."). You can also enter the
same user name for different registrar and proxy IP addresses.
5. Press Done to save the changes.
6. Select Display Name to enter the name used in the display name field of the "From SIP"
header field.
7. Press Done to save the changes.
8. Select Screen Name and enter the name to display on the idle screen.
9. Press Done to save the changes.
10. Select Authentication Name to enter the authorization name used in the username field
of the Authorization header field of the SIP REGISTER request.
4-61
on or
page A-68 "SIP Basic, Per-Line Settings"
or
"SIP Per-Line Call Waiting Setting"
page 5-67. Call Waiting cannot be set via the IP Phone UI.
You can set global configuration only using the IP Phone UI.
on . For specific
page A-77
on .
page A-82
"SIP
"Call Waiting